Johnson Controls XP-910x Manuel d'utilisateur télécharger pdf (Page 18)

18 Configuration Guides—XT-9100 Configuration Guide

The source of the analog output signal is defined in the DX-9100

Controller.

Via the GX Tool

Select XTn, AOn, Data, and the “Source Point” field. Enter * and select

the required source variable.

Via the SX Tool

Refer to the Extension Module Configuration section of the DX-9100

Configuration Guide (LIT-6364030).

1. When the XT-9100 is connected to a DX-9100 Controller, you can

view and override the AO value from the DX-9100 front panel. See

Display Panel and Keypads in the DX-9100 Extended Digital

Controller Technical Bulletin (LIT-6364020).

2. The analog output values can be read in percent at Item AOn

(RI.20-27) with the SX Tool.

AO: Source

(with DX-9100

Only)

AO Notes

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Johnson Controls XP-910x Manuel d'utilisateur Page 18